Clone RFID Sticker ngu ai gaw hpa rai nna, dai ni na aten na shimlam masa ni hta gara hku galaw ai kun?

Duplicator langai mi nsen pru nna screen kaw tsun ai .awng dang hkra ka ai. Dai sticker gaw phone langai a hpang maga de shang mat ai. Chyinghka kaw, laika hti ai wa hpa mung n galaw ai: beep n pru ai, LED n pru ai, log n shang ai. Customer wa gaw lai wa sai minit shi daram hta kaja ai hku chyam yu ai product langai mi hte dai kaw tsap nga ai.

 

Ndai gaw, duplication hpe bai dut ai mari ai ni kaw na anhte lu la ai madi shadaw ticket law dik htum rai nna, mabyin shagu ngu na daram hta, copy galaw ai wa gaw galaw ra ai hte maren sha galaw ai. Dai majaw clone RFID sticker hte seng nna akyu rawng ai ga san gaw, ka ai lam galaw ai kun ngu ai n re. Dai ka da ai laika gaw, dunghkum kaw nna chyinghka du hkra hkawm sa ai hkrun lam hpe lai di lu na matu, kaga tengman ra ai lam rai nga ai.

 

 

 

 

Dai ga si hpe .cloneshi a lawu e n seng ai hpaji lam lahkawng nga ai hpe makoi da nna, dai ni hpe kayau kaya galaw ai gaw sourcing shawng shut ai shara re.

 

Low-frequency 125 kHz masat masa ni, lachyum gaw legacy access control hta lang ai EM4100/TK4100 dinghku hpe, T5577 (sh) EM4305 chip de ID nnan ka nna, dai gaw original a masat dingsat hpe madun dan lu hkra, bai gram lajang ai. MIFARE Classic hpe madung tawn nna, n-gun kaba ai-13.56 MHz masat masa ni gaw kaga hku bungli galaw ai. Dai laklai ai masat kumla gaw block 0 kaw nga ai, dai gaw standard chip langai mi hta hti ai-sha re, dai majaw UID galai shai mai ai RFID sticker langai mi ra ai, dai hpang she bai gram lajang ai lam gaw tsep kawp n mai byin ai. Ndai dinghku lahkawng hpe mahtai jaw na matu matsun da ai hpe Proxmark tooling (Rfid sawk sagawn hpung), hte HF nbung n-gun hpe ISO/IEC 14443 hta tsun da ai.

 

Hpaga ga ai wa a matu ga gale ai lam gaw kadun ai: kaga ga san ni n ahkyak shi yang, hti ai wa hte frequency gaw bung ra ai.

 

Dai ga si gaw teng ai hte masha law malawng hkring ai shara mung rai nga ai, dai majaw batch law law gaw frequency check out galaw ngut ai hpang naw hkrat sum nga ai. Frequency hpe match galaw ai gaw, sticker hpe sha ga shaga ai lam de shang shangun ai. Laika hti ai wa gaw hpang de na ai hpe hkap la na kun ngu ai gaw, dai chip a mahtai jaw ai atsam hta madung nga ai, dai gaw laksan filter langai mi rai nna, nang n hkang ai hardware hku nna lang ai. 13.56 MHz hta target system galaw ai rai yang, UID-format hte hti ai wa-akyang lailen ga san ni hpe gara sample hpe mung n garan shi yang, shanhte nan galaw na matu manu dan ai (MIFARE-hpawng npawt nhpang laika buk ni).

 

 

Ndai kaw gaw, clone galaw mai ai RFID sticker order langai mi hpe katsi katsang galaw na kun, shing nrai, prat tup madi shadaw ai queue de gale mat na kun ngu ai hpe dawdan ya ai variable nga ai, dai gaw spec sheet langai mi hta mung n law htum n pru ai: HF chip a "magic" prat.

Gen1a chips ni gaw block 0 hpe bai ka na matu laksan backdoor wake-up ngu ai matsun hpe ra ai. Gen2 chips ni gaw direct-ka nna, laksan sequence n lawm ai sha, shinggyim ka ai command hpe hkap la ai. FUID zawn re ai langai-kalang-ka ai class ni gaw shawng na block 0 edit galaw ngut ai hpang backdoor command hpe n htang ai, dai gaw copy hpe prat tup pat da ai. Customer langai hpe 5,000 sa dat u, dai hta 3,000 gaw Gen1a, 2,000 gaw Gen2 rai nna, shanhte a programming station gaw backdoor sequence hpe sha shapraw ai rai yang, Gen2 daw gaw du wa ai shaloi scrap rai mat ai: n kaja ai, shanhte madu da ai arung arai ni hte program n mai galaw ai sha rai nga ai. Dai gaw kadai mung n bang ai mari ai laika hta line langai mi a majaw byin pru wa ai 5-figure write-off re.

 

Chip jawng	Block 0 ka ai ladat	Shawng nnan copy galaw ngut ai hpang bai-ka mai ai	Kalang lang mari ai wa hte htap htuk ai
Gen1a lamik kumla	Hpang chyinghka hpe jasu -up matsun	Rai sai, bai kahtap nna	Proxmark- hpan lang ai arung arai ni hte bungli galaw ai ni
Gen2 lamik kumla	Direct ka ai, madang masat da ai matsun	Rai sai, bai kahtap nna	Ka-ang hkup lang ai arung arai ni, Android-madung tawn ai bungli galaw ai lam ni
FUID / langai-lang	Backdoor, shawng gram lajang ai sha	N rai, shawng ka ngut ai hpang pat da ai	Lawu de na re-cloning hpe pat shingdang ra ai magam bungli ni

 

Lahkawng ngu na, grau loi ai hkrat sum ai lam hpe chye na matu manu dan ai. Shawng na magic chips ni hta ISO 14443-2 bit aten ladaw kata na field pause kadun hpe gara hku hparan ai hta n kaja ai lam nga ai. Tengman ai card langai gaw, lamik kumla card nkau mi matut galaw na shara kaw jahkring kau na rai nna, laika hti ai ni hpe hpang e dai akyang lailen hpe hkrak hkrak fingerprint galaw ai filter ni hte update galaw ya ai, dai gaw hpang jahtum dai chip ni hpe galaw shapraw ai lam kaw na shapraw kau ya ai. Reseller langai a matu, akyu gaw hpang hkrat wa ai: dai ni chyam dinglik ai lam shagu hta lai di lu ai cloneable RFID sticker batch hpe, shata shi matsat na ai hpang, invoice hpe clear galaw ngut ai hpang aten na na ai hpang, firmware-update galaw da ai laika hti ai wa gaw atsin sha ningdang kau lu ai.

 

Kaning re ai supplier mung reader galaw ai wa a htawm hpang na firmware arawn alai hpe ga sadi n jaw lu ai, ga sadi jaw ai wa kadai mung sawn la ai sha rai nga ai. Nang galaw lu ai lam gaw hpaji masa hta grau nna ga shaka hte seng ai lam rai nna, dai gaw lam mali de du wa ai. "MIFARE-htap htuk ai" hpe n hkap la na malai, PO kaw na chip daw nambat hpe hkrak hkrak gram lajang u. Carton langai hta lot nambat ni hpe dip shapraw (sh) ka matsing da ra ai, dai majaw manghkang batch langai hpe shaning mi shapraw ai hpe bai myit dum na malai, garan tawn da mai ai. Langai maga de na lot langai hte langai kaw na sealed sample ni hpe tawn da na. Bai nna, customer langai a reader firmware hpe mid-contract galai kau yang, kadai ni bai-chyam yu na hte kadai ni manu jahpu hpe hkam la na hpe tau hkrau myit hkrum da u. Dai ni hta na langai mi mung exotic n re. Dai gaw gara tara shang daw ni hpe jaw ya ai hta mung, masat da ai lailen rai nna, dai gaw, hkan tam mai ai mabyin langai hpe, ndang kalang byin ai lam hte garan ginhka ai lam rai nga ai. Ndai dawdan lam ni a hpang e nga ai chip dinghku ni gaw anhte .grup yin hta shingdaw ai - tsang fobs hte sticker ni hpe gawgap u, dai majaw, dut shabra ai lam hta n lawm ai sha, dai daw nambat gaw, order hta lawm ai.

 

Kaji ai trap langai mi gaw write step kata kaw nan dung nga ai. UID a hpang na byte gaw BCC checksum rai nna, UID byte mali a XOR rai nna, n tara ai manu hpe ka ai shaloi soft-chip hpe bricks galaw kau ai. Scrap rate hta hkrak hkrak hkrat wa ai high-volume line langai mi hta, dai gaw batch consistency gaw akyu n re ai sha, galaw shapraw ai lam a ga san langai mi rai nga ai.

 

 

Industry arawn alai gaw sticker langai gaw sticker langai rai nna, galai shai ai lam ni gaw diameter hte n-gun rawng ai lam sha re ngu tsun ma ai. Ndai product category hta grau nna myit ung ang hpa hkrat sum ai lam gaw kaga hku tsun nga ai. Box kaw na bungli galaw ai sticker hpe raw kau nna, handset a hpang maga de (sh) n-gang chyinghka plate ntsa kaw tawn da yang, dai range gaw hkrat sum mat ai (sh) n nga mat ai. Chip gaw kaja ai. Physics gaw galai shai mat wa ai.

 

 

Dai fix gaw sticker hte magri lapran na ferrite isolation layer rai nna, dai gaw conductive surface kaw na flux hpe n shapraw kau ai sha, jai lang mai ai range hpe bai gram lajang ya ai. Raitim, anti metal RFID sticker shang lu na matu hkang ai lam hpe jai lang na matu, checkbox hta grau nna dawdan lam naw ra nga ai, lamu ga jarit gaw ndai hku sha rai nga ai. Target hti ai tsan ai shara kadun ai rai yang, lachyum gaw, bunghku hti ai wa hpe lang ai wa hkrak hkrak hkra ai rai yang, reposition galaw ai sha, ferrite n lawm ai sha, ra ai daram tsan ai shara hpe bai lu la ai. Sticker gaw battery module hpring ai (sh) n-gang chyinghka plate hpe lai nna bungli galaw ra ai rai yang, ferrite gaw lata la mai ai lam n re ai sha, n-gun ja ai lam gaw ahkyak ai. Laird zawn re ai component supplier ni gaw ndai class application a matu 0.05, 0.1 hte 0.2 mm ngu ai standard sheet thickness ni hpe shapraw ya ai, 0.3 mm hpe hpyi shawn ai shaloi lu la mai ai, dai range a n-gun n law ai daw gaw 125 kHz hta flux volume grau kaba ai shara hta n-gun n rawng ai hku galaw chye ai. Air gap langai sha gaw mungkan lahkawng yan hta grau sawng ai: range n jat shi yang aten na na bulk hpe jat ya ai.

 

Dai majaw ndai kaw na deliverable gaw claim n re ai sha shadawn shadang langai mi rai nga ai. Absolute centimeter jahpan ni gaw bungli masing lapran n kaja ai hku hkawm sa ai, hpa majaw nga yang, inductive coupled system hta ceiling hpe laika hti ai wa gaw masat da ai: akyu rawng ai tara langai gaw, laika hti ai wa a antenna a diameter hta na htam langai kaw nna lahkawng lang daram hta, n-gun grau law ai shara de hkrat wa ai. Hpa gaw hkrun lam hkawm ai ngu ai gaw ratio re. Lawu na table gaw sticker gawgap ai lam hta anhte galaw ai hkap la ai envelope rai nna, batch langai hte langai a tinang a bare-surface baseline hpe ninghkap nna tsun dan ai:

 

Hkrun lam masa	Shachyaw ai	Myit mada ai mahtai vs npawt nhpang	Tara jeyang ai lam
-hpri nre ai ntsa	Madang masat 0.9 mm sticker	100% ngu ai lachyum hpe tsun ai. 25–30 mm gumhpraw sticker ntsa hta, shinggyim masha ni a bunghku hti ai wa hpe shingdaw nna, ndai gaw shapraw da ai 1–10 cm band a lawu daw hta dung nga ai.	Batch a matu laika buk
Hpyen n-gang, hkrak matut mahkai	Madang masat 0.9 mm sticker	Zero hte ni ai, law malawng gaw n hti ai	Ndai build hpe hkum tsun
N-gang n-gang	Sticker + 0.2–0.3 mm nlung	60–80%	60% hta grau kaba ai (sh) maren sha hkap la u
Phone bai nhtang wa nna, battery ntsa	Madang masat 0.9 mm sticker	Zero hte ni ai	Ndai build hpe hkum tsun
Phone hpang maga, jut, charge coil kaw na san seng ai	Sticker + 0.2–0.3 mm nlung	40–70%, lata hte n bung ai	Handset model masum hta 50% hta grau kaba ai (sh) maren sha re ai hpe hkap la u

 

Ndai hpe kalang mi na a hti ai wa hpe shingjawng nna, nambat ni a makau kaw model hte antenna diameter hpe ka da u. Dai laika man langai gaw, shawng nnan na shata hta, customer langai san na lam law malawng hpe htai ya ai. Bai nna, phone-mount constraint gaw n ra ai hku byin wa yang, keyfob nta langai gaw manghkang yawng hpe shingdu dat ya ai, dai gaw sticker form factor hpe tsep kawp n galaw shi yang, maram yu na matu manu dan ai (access hpe hkang ai bungli masing ni a matu fob lata ai lam).

 

 

 

Ndai hpan hta grai yak ai npawt nhpang nga ai, dai lam hpe ding ding man man tsun ai gaw kam mai ai supplier langai byin ai a daw langai mi rai nga ai. DESFire EV3, SEOS, dai ni na MIFARE prat ni zawn re ai makoi magap da ai masat da ai lam ni hpe laksan hku nna gram lajang da ai rai nna, ya aten na laika hti ai ni law law gaw copy ni hpe tsep kawp ningdang kau ma ai. Legacy, n-hkap la ai format ni hpe sha, tatut hta bai gram lajang mai ai. Grau dam lada ai gat lawk gaw dai hku myit mada let shamu shamawt nga ai: access-control hti ai ni gaw n law ai-frequency, loi loi hte copy galaw mai ai makau grup yin card ni kaw nna, makoi magap da ai hpaji rawng ai masat masa ni hte chyinghka kaw na multi-factor authentication de htawt sit wa nga ai (360i sawk sagawn ai lam). Access control a matu RFID sticker hpe bai gram lajang ai gaw, shayawm mat wa ai addressable base nga ai, kaga hku galaw ai gaw mari ai wa hpe hpa akyu n jaw ai.

 

"Compatible" ngu ai mung "nsen" hte bung ai ga si n re. Hpaji ninghkring ni gaw MIFARE Classic-htap htuk ai hku nna grai law hkra dut shabra ai chip langai rai nga ai FM11RF08S hpe sawk sagawn ai shaloi, card-sha gasat ai hku nna du lu ai hardware backdoor hpe mu lu ai, dai gaw user-defined keys ni hpe hpaw shadan dan lu ai (Quarkslab, CyberInsider hku nna).

 

Dai majaw mari ai wa gaw dai hpe hpa galaw ra na kun? Lam masum, yawng hpe na a maga kaw nna jep chyoi mai ai. Chip a daw nambat hte die dut ai wa a mying hpe dinghku n san yu u, hpa majaw nga yang "MIFARE-compatible 1K" ngu ai gaw shimlam labau n bung ai chip dozen hpe tsun dan ai. Supplier wa gaw shi a chips ni hpe shi nan bond galaw ai kun, shing nrai, ngut sai inlays ni hpe mari ai kun ngu san yu u, hpa majaw nga yang, shi a chip-bonding line hpe galaw ai factory gaw IC lots hpe hkrak hkam la nna, batch langai gara kaw na pru wa ai hpe tsun dan lu ai, inlay ni hpe bai dut ai hpaga nta langai gaw, n mai tsun dan ai. Bai nna, die vendor langai hpe shawa man hta mid-contract hta n tara ai hku jahten kau ai shaloi hpa byin wa ai hpe san yu u: kadai wa gaw galai na matu gingdan ai, kadai a aten ladaw hta. Dai hpe myit yu sai supplier langai gaw, ga si langai hte htai na re. N lu shi ai wa gaw, ga baw hpe manu de galai kau na re. Dai zawn re ai myit masa gaw, manam daw ai bungli masing ni hta, kam hpa mai ai lam hpe gara hku masat da ai hpe uphkang nga ai, dai shara htaHotel sumri card ni a hpang e nga ai shimlam sawn la ai lam nitend gaw nta bungli hta grau nna audit galaw hkrum chye ai.

 

 

Copy langai mi gaw .tara lam hte seng airai kun ngu ai hte hpa n seng ai daram rai nga aiHpaji masa hku mai byin ai. Access credentials ni hpe tinang a arung arai ni hta grau nna hkang zing da ai arung arai ni hku nna ayan mu mada ma ai, dai masa gaw nta htinggaw jahpan, condo tara ni, HOA tara ni hta dan dawng nga ai. Extra credential de sa na matu sanction galaw da ai lam gaw, nta langai nan a shapraw ai lam rai nna, dai kaw copy nnan hpe ka bang nna, moi na hpe dawm kau nna, jep joi ai lam galaw mai ai (Nimbio). Dai lam a shinggan na clone RFID sticker de key fob hpe copy galaw na matu lata ai gaw, n kaja ai lam hpe hparan ya nna, jahpan hta n bung ai lam hpe shabyin ya ai, hpa majaw nga yang, hparan hpareng ai ni gaw dai jat ai masat da ai lam nga ai hpe n chye na na re.

 

Anhte gaw dai ahkang jaw da ai masa kata hta bungli galaw nga ai hpaga lam ni hpe jaw ya ai: laknak galaw ai ni, masat masa-hkap la ai magam bungli ni, system ni hpe hpaw shalawm ai ni, hte shanhte a nta htinggaw ni hpe masat masa ni hpe bai jaw ya ai nta madu ni. Anhte gaw shimlam masa hpe dang kau na matu galaw da ai hpa hpe mung n jaw ga ai, dai hpe asan sha tsun dan ai gaw, n-gun jaw ai lam n re ai sha, laklai ai lam langai re.

 

Anhte a kaja dik htum customers ni hpe tsun dan na matu mung byin pru wa ai. Gara credentials ni hpe bai shapraw na ahkang lu ai hpe chye da sai, kadai ni document galaw lu ai hpe chye da sai mari ai ni gaw, hpang na daw hta sourcing ga san ni hpe san ai ni rai ma ai, hpa majaw nga yang shanhte a risk gaw tara shang hpaw shadan dan ai lam n re. N galaw ai batch langai mi re.

 

 

Ndai hpan hta lawm ai sourcing manghkang law malawng gaw mari ai-order ladaw hta pat shingdang mai ai. Dai majaw, n-gun ja ai OEM cloneable RFID sticker supplier langai ngai gaw, n-gun n rawng ai sha, dai lam kru hpe htai ra ai: chip daw nambat hte shi a die source hpe hkrak tup htai ra ai; lamik kumla prat, langai- aten-ka ai hte bai ka mai ai ngu nna asan sha tsun da ai; diameter hteyawng hpawngara ferrite layer hpe mung lawm ai n-gun; n-gun rawng ai grade hte dai hpe masat da ai substrate; pru wa ai chyam dinglik ai lam ni, lachyum gaw, chyahkring hkring, hti ai tsan ai shara hte data a n-gun, shinggrup ai lam hte rau; hte lot hpe hkan tam lu ai lam.

 

List gaw loi ai daw mi re. Clone galaw mai ai RFID sticker wholesale order hpe teng sha makawp maga ya ai daw mi gaw, n-gun kya ai mahtai ngu ai lachyum hte dai hpe hpa galaw ra na hpe chye ai lam rai nga ai.

 

Supplier wa chip jaw ai rai yang .dinghkupart number a malai, dai gaw shanhte gaw ngut sai inlays ni hpe mari nna die hpe n hkang ai ngu ai lachyum rai nga ai. low-risk volume a matu bungli galaw mai ai, raitim shanhte n lu htai ai compatibility ga san ni hpe san ai hpe jahkring kau u, nang hkum nan shang wa ai jep joi ai lam a matu budget galaw u. Shanhte gaw magic generation hpe n lu tsun yang, batch hpe kayau kaya re ngu sawn la nna, dai hpe ningdang kau na (sh) sorting step hta manu jahpu jaw na. Shapraw ai chyam dinglik ai lam hpe "sampling" ngu nna tsun ai rai yang, rate hte AQL hpe san yu u; 100% chyam yu ai supplier langai mi gaw kalang ta tsun na re, hpa majaw nga yang shanhte hpe gumhpraw jaw ra ai majaw shanhte gaw dai a matu credit ra sharawng ma ai. Shanhte gaw lot nambat ni hpe n lu jaw yang, hpang de n kaja ai batch hpe garan ginhka lu na lam n nga ai, dai gaw ndai jahpan hta manu dan dik htum ai lam langai sha rai nna, tengman ai lam byin ngut ai hpang mu tam lu na matu re. Bai nna, quote galaw da ai n-gun gaw ferrite layer hpe n lawm ai rai yang, sample hpe tinang nan bai shadawn yu u, hpa majaw nga yang, dai n bung ai lam gaw phone-mount project hpe bai nhtang wa shangun ai lam rai nga ai.

 

Anhte maga de dai ga san ni hta tengman ai mahtai ni nga ai, hpa majaw nga yang, dai lam hpe jahtum kaw nna jahtum du hkra hkang lu ai: copper-wire antenna winding hpe ±0.1 mm daram jum da ai, in-house chip bonding hpe shani shagu wan hku law ai atsam hte shingdaw nna, 100% pru hkawm ai hku jep joi ai lam galaw ai hta grau nna sample hkam la ai. Dai ±0.1 mm gaw nsam galai shai ai frequency spec langai mi re. Coil geometry gaw inductance hpe masat da ai, tag nsen pru ai shara hpe inductance masat da ai, unit langai kaw nna unit langai de hkawm sa ai nsen pru ai shara hpe masat da ai ngu ai gaw batch langai hta na daw nkau mi gaw kaga ni hta grau nna laika hti ai wa a hkam sharang ai hkuwawt shingdu de grau ni ai shara kaw dung nga ai hpe tsun mayu ai. Dai ni gaw, ngam ai shipment ni galaw nga ai aten hta, chyinghka kaw kalang lang hti ai daw ni rai nna, dai ni mung a majaw re .volume hpe n galaw shi yang, yaw shada ai laika hti ai wa hte sample langai hpe jep joi ai lam galaw ai.bat lahkawng tup manu dan ai. Na a bungli masing hta, masat da ai catalogue hta n lawm ai form factor, n-gun, shing nrai, ferrite gawgap ai lam ra ai rai yang, dai gaw .tooling hte process ga san hpe anhte - nta kaw hparan aisourcing galaw ai hta grau nna.

 

 

Anhte a galu dik ai matut mahkai lam langai gaw, nta ntsa kaw nga ai French company langai hte-access-credential hpe bai gram lajang ai gat lawk re. shaning jan hta shanhte gaw anhte kaw na laning mi hta copy fob 500,000 daram hpe la kau sai, dai hpe galaw lu hkra dawdan ai lam gaw manu n re.

 

Shanhte gaw n htum n wai bai ka mai ai lamik kumla chip a malai, kalang -ka lang-ka ai FUID chip hpe masat da ma ai. Hpa majaw nga yang, hpaga lam a matu re. Shanhte a counter kaw na credential langai pru mat wa ai shaloi, shanhte gaw, hpang jahtum na customer, shing nrai, npu na kadai mung, dai hpe kaga langai ngai de bai ka nna, dai hpe shanhte a brand de bai hkan tam na matu n mai byin hkra galaw mayu ai. Anhte gaw shanhte a fobs ni gaw shanhte a logo hpe lang na matu, tooling nnan ni hpe mung gang je kau ga ai, dai gaw dai manghkang langai sha a kaga daw hpe pat kau ya ai: copy shop ni gaw shanhte a product hku nna generic nta ni hpe lai kau ya ai. shaning hte unit wan 2.5 daram na ai hpang, chip-generation ga san gaw madi shadaw ai lam hku nna galoi mung n bai wa sai, hpa majaw nga yang, shawng nnan na order n bang shi yang, kalang mi, laika hku nna htai ya sai majaw re.

 

Dai gaw, clone RFID sticker hpe arung arai langai zawn n re ai sha, masat da ai lam langai hku nna mu mada na matu, tsun shadut ai lam yawng rai nga ai. Nang gaw na a volume a matu dai zawn re ai trade-offs hku nna bungli galaw mayu yang, chip byin pru wa ai, n-gun ja ai, ferrite gawgap ai hte chyam dinglik ai coverage hpe shinggrup da ai rai yang, anhte a engineer ni gaw tengman ai sample hpe ninghkap nna galaw na re.Tooling galaw na matu ga sadi n jaw shi yang, spec sheet.